Short answer: yes, but only with a machine designed for it. A normal washing machine weighs 60 to 80 kg empty and generates forces during the spin cycle that are a multiple of that. Nobody hangs one of those on a wall. Wall-mounted washing machines are a separate category of appliance: smaller drum, far less mass, and a mounting system that carries the load into the wall.
Why a normal washing machine cannot go on the wall
The problem is not the weight on its own — it is what happens during the spin. Laundry never distributes itself perfectly evenly in the drum. At 1,200 revolutions per minute a small imbalance becomes a force that pulls and pushes on the fixing cyclically, several times a second, for the whole length of the spin cycle.
That is why normal washing machines stand on the floor and are levelled on their feet: the floor takes the load, and the mass of the appliance damps the imbalance. A wall fixing would have to absorb those same alternating loads without working loose over the years. At 70 kg of base weight, that stops being a sensible thing to ask of a wall.
What a wall-mounted machine does differently
The category solves the problem at the root: less mass, less laundry, less force. Compared with a standard machine:
| Standard front-loader | Wall-mounted (LECHO) | |
| Empty weight | 60–80 kg | 18 kg |
| Load capacity | 7–9 kg | 2.5 kg |
| Width | approx. 600 mm | 574 mm |
| Depth | 550–650 mm | 317 mm |
| Floor space | approx. 0.36 m² | none |
The depth is what matters. At 317 mm the machine projects into the room about as far as a wall cabinet — you walk past it without stepping around it. And at 18 kg empty it sits in a range where a properly executed wall fixing is technically unremarkable. In use, with laundry and water, another 10 to 14 kg comes on top depending on the programme.
What does the installation involve?
Three connections, the same as any washing machine — just at working height instead of at floor level:
- Cold water. A standard appliance connection with a shut-off valve. No hot water feed is needed; the machine heats its own.
- Waste water. The drain hose runs into a trap or a standpipe. Wall mounting puts the outlet higher than on a floor-standing machine, which is not a problem as long as the manufacturer's maximum drain height is respected.
- Power. An ordinary socket, 220–240 V / 50 Hz. The 1,500 W heating element is unremarkable on a normal 16 A circuit.
Then there is the mounting itself: the wall bracket goes up with the fixings the manufacturer specifies, matched to the wall construction. Which walls qualify is the decisive question, and it has its own article: Which walls can carry a washing machine?
When it does not work
There are cases where a wall-mounted machine is the wrong choice, and they are worth saying out loud:
- Larger households. 2.5 kg is roughly five to eight shirts, or nine to twelve items of baby clothing. As the only machine for a family of four, that is not enough.
- Bedding and large textiles. A duvet does not fit in a 2.5 kg drum.
- No suitable wall. A free-standing partition wall with no reachable studs is not something to mount to.
- Water and drainage far away. The machine saves floor space, not plumbing work.
The two situations where it genuinely fits: the small household where 2.5 kg per cycle is simply enough, and the larger household that wants a second machine for baby clothes, underwear or sportswear without finding a second place to put one.
